Newest and specialty models of MM-2 Horizontal Filter Screw Press adapted
for particular use of back straining.
Back-straining & De-foaming
without "High speed spinning" and "Vacuum"
High presicion back-straining using 30 μm slit element and simultaneous de-foaming (or foam decreasing) enhance the quality of products and improve the fluidity of the material at time of filling work.
Steady and continuous operation attains productivity improvement without clogging even for the higher viscosity material and the material in difficulty of pump transfer.
Available two types, pump-feeding and self-feeding with hopper(Sanitary design)
Available for optional specification upon request
These machines can be effectively used for the production with no need of de-foaming operation.
Also can be effectively used for Solid-liquid separating, Extracting and De-watering.
|Strain and de-foam Functional food material
Solid-liquid separation/Strain and de-foam Healthful food material and Herbal medicine
Strain and de-foam Sake Kasu(Sake brewing waste)
Strain and de-foam Soup and Seasoning liquid
Solid-liquid separation/Strain and de-foam Fruit juice, puree and jam
Strain Vegetables such as Potato and Carrot
Example of use of MM-2 Ultra-Refiner & MM-2 Super-Finisher
MM-2 Ultra-Refiner is to have an M-CELL element with slit gap between 30
μm and 500 μm.
MM-2 Super-Finisher is to have an X-CELL element with hole diameter between Ф0.5 mm and 3.0 mm.
By exchanging M-CELL and X-CELL elements, one unit of the machine can be alternatively used for Refiner or Finisher.